Category: Engineering & Technology
It is a significant fact that nearly all Ford cars are driven by laymen--by owners, who in the great majority of cases have little or no practical experience with things mechanical.
The first operation is the assembling of group No. 2, which is as follows: Place the brake drum on table with the hub in a vertical position, place the slow speed plate over the...
5. Part 5First, jack up the wheel clear of the road. The valve cap should be unscrewed, the lock nut removed and the valve stem pushed into the tire until its bead is flush with the rim....
2. Part 2They seldom get out of order--but they do get dirty, as a result of carbon collecting on the valve seats. These carbon deposits by preventing proper closing of the valves, permi...
1. Part 1It is a significant fact that nearly all Ford cars are driven by laymen--by owners, who in the great majority of cases have little or no practical experience with things mechani...
3. Part 3The presence of water in the carburetor or gasoline tank, even in small amounts, will prevent easy starting and the motor will misfire and stop. As water is heavier than gasolin...
6. Part 6Keep the filling plugs and connections tight and the top of the battery clean. Wiping the battery with a rag moistened with ammonia will counteract the effect of any of the solu...