CHAPTER VII.

SATINWOOD.

This is a very delicate wood, of the maple family; it probably derives its name from its resemblance to folds of satin. It is seldom represented in America, but is frequently imitated in England, being used in connection with maple in some of the principal rooms, such as drawing-rooms, parlors, etc. The panels of the room are done as satinwood, the stiles as maple, and sometimes the mouldings as a darker wood, such as dark oak, walnut or rosewood.

The same groundwork and the same graining-colors may be used as in representing maple, but a little ivory black may be added. The tools are similar, but a piece of buckskin or chamois leather is substituted for the bristle mottlers used for maple. A roll of oil-putty is sometimes used to take off the color in making the high lights; the putty should be rolled along the panel lengthwise of the grain, and then the panel blended crosswise. Care should be taken to have the graining-color light, as the effect is lost if the color be too dark. The lights are quite prominent, and it requires no little skill successfully to imitate them. When the mottling or lights and shadows are dry, they may be very lightly over-grained with a fine bristle overgrainer, the bristles being separated by a comb and the color used very thin. The over-graining should not be blended, as it will look too prominent and spoil the effect of the lights and the shadows. A piece of soft cotton rag will answer the same purpose as the buckskin or chamois leather. When using either of them with the intention of making the mottled effect of the wood, first wet them in clean water or in beer and wring them out nearly dry; then, after the color is rubbed on the work, roll them over them over the surface as directed. The result will be that the leather or the rag will take off the patches of the wet graining-color. Then blend softly, and when dry overgrain.