"Crazy Daisy" Boutique, Vol. No. 5
Part 1
_“Crazy Daisy” Boutique_
VOL. NO. 5 by HERO $1.00
ORIGINAL “CRAZY DAISY” DESIGNS
INDEX
Page Long Daisy Bolero 5 Baby Sacque and Cap 6 Bulky Yarn Afghan 8 Crazy Daisy Shell 10 Long Skirt 11 Short Skirt 11 Mother and Daughter Dress 14 and 15 Dimensional Daisy Pillow 15 Striped Daisy Pillow 15 Wall Hanging 17 Crocheted Afghan with Daisy Trim 18 King Size Crazy Daisy Stole 18 Carriage Robe 19 Daisy Trim Apron 20 Tablecloth 20 Mardi Gras Bag 22 Daisy Snood 22 Crazy Daisy Handbag 22 Crazy Daisy Cardigan 23
VOLUME 5
All directions in this book have been checked for accuracy. We cannot be responsible for typographical errors or misinterpretation of directions.
• Copyright SCOVILL MANUFACTURING COMPANY DRITZ DIVISION 350 Fifth Avenue New York, N.Y. 10001 • Published in U.S.A.
It’s a _“Crazy Daisy”_ world!
OTHER FAMOUS HERO PRODUCTS ...
• Hero Standard Knitting Needles • Perfectly Formed Crochet Hooks • One Piece All Nylon Circular Needles • Over 100 Knitting Aids and Accessories
SCOVILL DRITZ DIVISION SCOVILL MANUFACTURING COMPANY 350 FIFTH AVENUE, NEW YORK, N. Y. 10001
Helpful Hints and General Directions
HOW TO DETERMINE SIZE TO MAKE: Directions are based on standard measurements listed below. Allowance has been made to size, stitch, yarn and style of garment for best results. These are general body measurements and may vary with each individual.
SIZE 10 12 14 16
BUST 32½″ 34″ 36″ 38″ WAIST 24″ 25½″ 27″ 29″ HIP 34½″ 36″ 38″ 40″
Consult chart to determine size to make not overlooking the fact that these are body measurements and not measurements of finished garment.
HOOKS, TERMS AND ABBREVIATIONS:
Crochet Hooks are made in steel, plastic and aluminum. Steel crochet hooks range in size from 00 the largest to size 14 the smallest. Aluminum crochet hooks range in size from C through K and plastic crochet hooks come in the following sizes: OD, 1-2E, 3-4F, 5G, 6H, 8I, 9J. The size of needle affects the gauge and therefore the measurements of the finished garment. It also affects the texture of the work. A needle that is too fine for the yarn makes the garment stiff and a needle that is too coarse makes the garment stretchy.
Tapestry Needles are large-eyed blunt pointed needles used for sewing garments tog or embroidery.
An asterisk (*) indicates that instructions immediately following are to be repeated the given number of times, in addition to the original. “Repeat from * 4 times” means 5 times in all.
Even means that a row or rnd is to be worked without increasing or decreasing.
Work means to continue in same stitch you have been working.
Directions in parentheses are repeated as often as specified. “(Ch 3, sc in next sp of petal) 3 times” means whatever is enclosed in parentheses is to be repeated for 3 times in all.
CROCHETING ABBREVIATIONS:
ch—chain, sc—single crochet, dc—double crochet, sdc—short double crochet, hdc—half double crochet, trc—treble crochet, sl st—slip stitch, dec—decrease, inc—increase, st—stitch, tog—together, rnd—round, beg—beginning, sp—space.
TO MAKE DAISIES:
These directions can be used for the HERO Crazy Daisy Winder and for the HERO King Size Crazy Daisy Winder.
A: Hold winder in left hand with flat side in palm of hand. Turn knob to release spokes (see illustration A).
B: Turn winder over with knob underneath and flat side with spokes extended facing you. Hold winder in left hand. With left thumb hold yarn at center leaving end to extend about 1″; with right hand, pass yarn from left to right around spoke No. 1; then across center from right to left around spoke No. 2 directly opposite. Wrap around these 2 spokes once more in the same manner, or as many times as desired (the number of wraps depends upon the thickness of the yarn you will be using). Bring yarn across center and wind from left to right around spoke No. 3; then across center from right to left around spoke No. 4. Wrap around these 2 spokes once more, or as many times as you wrapped around spoke 1 and 2. Bring yarn across center and wind from left to right around spoke No. 5; then across center and from right to left around spoke No. 6. Wrap around these 2 spokes once more or as many times as you wrapped around spoke 1 and 2. Continue in this manner to wrap yarn around 2 spokes directly opposite each other and then passing onto the next 2 spokes until all spokes are wrapped, ending with spoke No. 12. Bring yarn across center and cut leaving 1″ extended beyond center (see illustration B). Do not remove from winder.
C: Center: Thread tapestry needle with yarn. The side facing you will be the wrong side of the daisy. Fasten at center of wrong side as for embroidery. Insert needle under 4 petals and draw yarn through; bring yarn back over last 3 of the 4 petals; insert needle under these 3 petals plus 1 more, making 4 petals in all; draw yarn through. Continue in this manner to bring yarn back 3 petals and then draw it under 4 petals each time until you have made 13 sts. Be sure to have 13 sts or center will be incomplete. As the center sts are worked, weave around the starting end of daisy for a few sts to fasten it securely. Fasten on wrong side. Cut ends (see illustration C). Turn knob to draw in spokes and release daisy.
D. Right side of daisy.
JOINING A: Picot Joining of Daisies: These directions can be used for the Crazy Daisy Winder and for the King Size Crazy Daisy Winder. Note: Connections for daisy have been written for a sport yarn or knitting worsted. The number of chains used in connecting the daisies to each other may have to be adjusted if any other type of yarn or cotton is used.
1st BLOCK: Using crochet hook, sc in sp of petal of daisy (make sure to take up as many of the petals as you wrapped around for each petal when winding). * (ch 4, sc in sp of next petal) 3 times, ch 5, sl st in side-top of last sc (picot); repeat from * twice more, ending (ch 4, sc in sp of next petal) twice, ch 4, join with a sl st to first sc, ch 5, sl st in side-top of last st (picot), 4 picots around. Leave a 2″ thread and fasten off securely on back.
2nd BLOCK: Sc in sp of petal of 2nd daisy. (Ch 4, sc in sp of next petal) 3 times, place daisy back to back to first block, ch 2, sl st in sp of picot on first block, ch 2, sl st back into last sc on 2nd block to complete the picot joining. (Ch 2, sl st in next ch-4 sp on 1st block, ch 2, sc back into next petal on 2nd daisy) 3 times. Ch 2, sl st in center of corner picot on first block, ch 2, sl st back into last sc on 2nd block to complete picot joining. (Ch 4, sc in sp of next petal on 2nd daisy) 3 times, ch 5, sl st in side-top of last sc for a picot, (ch 4, sc in sp of next petal), twice, ending ch 4, join with a sl st to first sc, ch 5, sl st back into last st to complete the picot. Leave a 2″ thread and fasten off securely on back.
3rd BLOCK: Join a 3rd block to another side of first block as follows: Sc in sp of petal of 3rd daisy. (Ch 4, sc in sp of next petal) 3 times, hold 3rd daisy back to back to first block, ch 2, sl st in sp of picot on first block, ch 2, sl st back in last sc on 3rd block, (ch 2, sl st in next sp on first block, ch 2, sc back into next petal on 3rd block) 3 times, ch 2, sl st in center st between the 2 picots that join the first and second block, ch 2, sl st in last sc on 3rd block, (ch 4, sc in sp of next petal) 3 times, ch 5, sl st in side-top of last sc (picot), (ch 4, sc in sp of next petal) twice, ch 4, join with a sl st to first sc, ch 5, sl st in last st to form a picot. Leave a 2″ thread and fasten off securely on back.
4th BLOCK: Join to one side of 3rd and one side of 2nd block as follows: Sc in sp of a petal of 4th daisy. (Ch 4, sc in sp of next petal) 3 times. Hold 4th daisy back to back to 3rd block, ch 2, sl st in sp of picot on 3rd block, ch 2, sl st in last sc on 4th block to complete picot joining. (Ch 2, sl st in next sp on 3rd block, ch 2, sc back into next petal on 4th block) 3 times, ch 2, sl st in center of the 3 joined picots that connect blocks 1, 2 and 3, ch 2, sl st back into last sc on 4th block (this completes a 4 picot joining). (Ch 2, sl st in next sp on 2nd block, ch 2, sc back into sp of next petal on 4th block) 3 times, ch 2, sl st in sp of picot on 2nd block, ch 2, sl st back into last sc on 4th block to complete picot joining. (Ch 4, sc in sp of next petal on 4th daisy) twice, ch 4, join with a sl st to first sc, ch 5, sl st back into last st worked to complete picot. Leave a 2″ thread and fasten off securely on back. Continue to make and join daisies for desired shape and size in this manner.
TO JOIN DAISIES WITH PICOT JOINING
JOINING B: 1st BLOCK: Rnd 1: With hook, sc in sp of petal (make sure to take up as many of the petals as you wrapped around for each petal when winding), * ch 4, sc in sp of next petal; repeat from * around, end ch 4, join with a sl st to first sc. Rnd 2: Sc in first sp, * (ch 4, sc in next sp) 3 times, ch 5, sl st back into sc to form a picot; repeat from * around, ending (ch 4, sc in next sp) twice, ch 4, join with a sl st to first sc, ch 5, sl st back into sc to complete picot. Leave a 2″ thread and fasten off securely on back.
2nd BLOCK: Rnd 1: Repeat rnd 1 of first block. Rnd 2: Sc in first sp, (ch 4, sc in next sp) 3 times, place daisy back to back to first block, ch 2, sl st in sp of picot on first block, ch 2, sl st back into last so on 2nd block to complete the picot joining. (Ch 2, sl st in next ch-4 sp on 1st block, ch 2, sc back into next ch-4 sp on 2nd block) 3 times. Ch 2, sl st in center of corner picot on 1st block, ch 2, sl st back into last sc on 2nd block to complete picot joining. (Ch 4, sc in next ch-4 sp on 2nd block) 3 times, ch 5, sl st back into sc to form a picot, (ch 4, sc in next ch-4 sp on 2nd block) twice, ch 4, join with a sl st to first sc, ch 5, sl st back into sc to form a picot. Leave a 2″ thread and fasten off securely on back.
3rd BLOCK: Rnd 1: Repeat rnd 1 of first block. Join 3rd block to another side of first block as follows: Rnd 2: Sc in first sp, (ch 4, sc in next ch-4 sp on 3rd block) 3 times, hold 3rd block back to back to first block, ch 2, sl st in sp of picot of first block, ch 2, sl st back into sc on 3rd block for completion of picot joining. (Ch 2, sl st in next ch-4 sp on first block, ch 2, sc back into next ch-4 sp on 3rd block) 3 times. Ch 2, sl st in center of joined picots of first and second block, ch 2, sl st in sc on 3rd block to complete picot joining. (Ch 4, sc in next sp on 3rd block) 3 times, ch 5, sl st back into sc to form a picot, (ch 4, sc in next sp on 3rd block) twice, ch 4, join with a sl st to first sc, ch 5, sl st in sc to complete picot. Leave a 2″ strand and fasten off securely on back.
4th BLOCK: Rnd 1: Repeat rnd 1 of first block. Join 4th block to one side of 3rd and one side of 2nd block as follows: Rnd 2: Sc in first sp, (ch 4, sc in next sp of 4th block) 3 times, hold 4th block back to back to 3rd block, ch 2, sl st in sp of picot on 3rd block, ch 2, sl st in last sc on 4th block to complete picot joining. (Ch 2, sl st in first ch-4 sp on 3rd block, ch 2, sc in next ch-4 sp on 4th block) 3 times, ch 2, sl st in center of the 3 joined picots that connect block 1, 2 and 3, ch 2, sl st back into last sc on 4th block (this completes a 4 picot joining). (Ch 2, sl st in first ch-4 sp on 2nd block, ch 2, sc in next ch-4 sp on 4th block) 3 times, ch 2, sl st in sp of picot on 2nd block, ch 2, sl st back into last sc on 4th block to complete picot joining. (Ch 4, sc in next ch-4 sp on 4th block) twice, ch 4, join with a sl st to first sc, ch 5, sl st in sc to complete picot. Leave a 2″ thread and fasten off securely on back. Continue to make and join daisies for desired shape and size in this manner.
LONG DAISY BOLERO
Shown on front cover
SIZES: Directions are for Small (size 8-10). Changes for Medium (size 12-14) are in parentheses.
MATERIALS: HERO Crazy Daisy Winder and King Size Crazy Daisy Winder. Sport Yarn, 2 oz. pull skein, 4 (5) Royal Blue (A) and 4 (5) White (B). HERO No. 1 steel crochet hook and tapestry needle.
GAUGE: Two connected blocks—6″.
NOTE: Shape of neck on medium size is slightly different in order to attain proper sizing.
TO MAKE DAISIES: Make 77 (91) daisies on King Size Crazy Daisy Winder, winding twice around spokes and sewing centers all with color A. Make 77 (91) daisies on Crazy Daisy Winder, winding twice around spokes with color B and sewing centers with color A. See page 3 for directions to make daisies.
1st BLOCK: Place smaller B daisy on top of A daisy and tack securely. Rnd 1: With B, sc in space of petal, going through both loops of petal of A daisy, ch 4, 2 hdc into sp of same petal (half corner), * (ch 1, 3 hdc in sp of next petal) 3 times, ch 1, 3 hdc back into last petal worked in to complete a corner; repeat from *, end (ch 1, 3 hdc in sp of next petal) twice, ch 1, 3 hdc in first petal, ch 1 and join with a sl st to top of starting ch to complete 4th corner. Fasten off B and attach A. Rnd 2: With A, sl st in sp of corner, * (ch 4, sl st in next sp under ch-1 of previous rnd) 4 times, ch 5, sl st back into base of last sl st in center of corner to form a picot; repeat from *, end with the completion of picot in 4th corner, join with a sl st to first sl st. Fasten off.
2nd BLOCK: Work as for first block until completion of rnd 1. Rnd 2: With A, sl st in sp of corner, (ch 4, sl st in next sp under ch-1 of previous rnd) 4 times, hold back to back to first block, ch 3, sl st in sp of picot on first block, ch 3, sl st back into base sl st to complete picot joining, (ch 4, sl st in next ch-4 sp on first block, ch 4, sl st in next ch-1 sp on 2nd block) 4 times, ch 3, sl st in picot on first block, ch 3, sl st back into base sl st to complete picot joining. * (Ch 4, sl st in next ch-1 sp) 4 times, ch 5, sl st back into base sl st to complete picot; repeat from * once more, ending with the 4th picot being worked in starting corner. Join with a sl st to first sl st. Fasten off.
3rd BLOCK: Work as for first block until completion of rnd 1. Third block is joined to another side of first block. With A, sl st in sp of corner, (ch 4, sl st in next sp under ch-1) 4 times, hold back to back to first block, ch 3, sl st in sp of picot on first block, ch 3, sl st back into base sl st to complete picot joining, (ch 4, sl st under next ch-4 sp on first block, ch 4, sl st under next ch-1 sp on 3rd block) 4 times, ch 3, sl st in center between joined picots of block 1 and 2, ch 3, sl st back into base sl st to complete picot joining. *(Ch 4, sl st under next ch-1 sp) 4 times, ch 5, sl st back into base sl st to form a picot; repeat from * once more, ending with the 4th picot being worked in starting corner. Join with a sl st to first sl st. Fasten off.
4th BLOCK: Work as for first block until completion of rnd 1. Fourth block is joined to one side of block 3 and one side of block 2. Rnd 2: With A, sl st in sp of corner, (ch 4, sl st in next ch-1 sp) 4 times, hold back to back to third block, ch 3, sl st in sp of picot on third block, ch 3, sl st back in base st to complete picot joining, (ch 4, sl st under next ch-4 sp on third block, ch 4, sl st under next ch-1 sp on 4th block) 4 times, ch 3, sl st in center of the 3 joined picots, ch 3, sl st back into base sl st to complete a 4 picot joining, (ch 4, sl st under next ch-4 sp on 2nd block, ch 4, sl st under next ch-1 sp on 4th block) 4 times, ch 3, sl st in sp of picot on 2nd block, ch 3, sl st back in base sl st to complete picot joining, (ch 4, sl st under next ch-1 sp) 4 times, ending in first corner, ch 5, sl st in base sl st to form 4th picot, join with a sl st to first sl st. Fasten off. Join all blocks in this manner.
BODY: Join 5 rows of 11 (13) blocks across to underarm (this includes right front, back and left front). RIGHT FRONT: Connect 2 rows of 2 (3) blocks for right front onto body. For medium size only, leave off 1 block at front edge for neck. For both sizes, connect 1 more row of 2 blocks. BACK: Leave off the 3rd (4th) block from right front edge for armhole and for the 6th row of back, connect next 5 blocks across back. Add 1 more row of 5 blocks for back armhole. LEFT FRONT: Leave off the 3rd (4th) block from left front edge for armhole and work to correspond to right front. Connect blocks from fronts to back for shoulders, leaving out center block on back for neck.
FINISHING: Block lightly on wrong side. TRIM: Row 1: Attach B at lower right front corner and sc under ch-4 sp, * ch 4, sc in next sp (1 pattern); repeat from * along right front edge, around neck, along left front edge and across lower edge, placing 2 patterns in each corner, ending join with a sl st to first sc (see that work lies flat). Row 2: With B, * ch 4, sc in next sp; repeat from * around all edges worked on row 1, placing 2 patterns in each corner, ending join with a sl st. Row 3: With B, ch 4, 2 dc in first sp, ch 1, * 3 dc in next sp, ch 1; repeat from * around all edges, placing 2 patterns in each corner, ending join with a sl st to top of starting ch (check to see that work lies flat). Fasten off B. Attach double strand A, and work backwards (counter clockwise) as follows: * Ch 1, hdc in next ch-1 sp (1 pattern); repeat from * around all edges, placing 2 patterns in each corner. Join with a sl st and fasten off.
ARMHOLE TRIM: Work same as for trim around edges of bolero.
BABY SACQUE AND CAP
Shown on page 7
SIZE: 6 mo. to 1 yr.
MATERIALS: HERO Crazy Daisy Winder. Sport Yarn, 2 oz. pull skein, 3 Mint Green (A) and 1 White (B). HERO No. 1 steel crochet hook and No. C aluminum crochet hook. Tapestry needle. 1 yd ½″ wide satin ribbon.
TO MAKE DAISIES: Make 62 daisies (57 for sacque, 5 for cap) following directions on page 3. Use A for petals and B for sewing centers, winding A 3 times around each spoke.
SACQUE
CONNECTING DAISIES: With B and No. 1 steel crochet hook, sc in sp of a petal (go through 3 loops of petal), * ch 3, yo and pick up a loop in first ch, yo pull through 2 loops (2 loops remain on hook), yo pick up a loop back in same first ch (4 loops on hook), yo pull through all 4 loops (cluster), sc in sp of next petal; repeat from *, end join with a slip st to first sc (12 clusters). Fasten off. Crochet around all 62 daisies with B in this manner.
FIRST BLOCK: Attach A, with No. 1 crochet hook, sc in back loop of sc of B cluster on previous rnd, * (ch 4, sc in back loop of sc of next B cluster of previous rnd) 3 times, ch 5, slip st back into base sc to form a picot; repeat from * around end (ch 4, sc in back loop of sc of next B cluster) twice, ch 4, join with a sl st to first sc, ch 5, slip st into base sc to complete the 4th picot. Fasten off.
SECOND BLOCK: Attach A and sc in back loop of sc of B cluster, (ch 4, sc in back loop of sc of next cluster) 3 times. Place daisy back to back with first block, ch 2, slip st in sp of picot of first block, ch 2, slip st back into base sc to complete picot joining, (ch 2, slip st in first space of first block, ch 2, sc in back loop of sc of next B cluster on 2nd block) 3 times, ch 2, slip st in picot of first block, ch 2, slip st back into base sc to complete picot joining, (ch 4, sc in back loop of sc of next B cluster) 3 times, ch 5, slip st in base sc to complete picot, (ch 4, sc in back loop of sc of next B cluster) twice, ch 4, join with a slip st to first sc, ch 5, slip st back into base sc to complete 4th picot. Fasten off.
THIRD BLOCK: The third block is joined to another side of the first block. With A, sc in back loop of sc of B cluster on previous rnd, (ch 4, sc in back loop of sc of next B cluster) 3 times. Hold daisy back to back to first block, ch 2, slip st in picot of first block, ch 2, slip st back into base sc to complete picot joining, (ch 2, slip st in first space on first block, ch 2, sc in back loop of sc of next B cluster on 3rd daisy) 3 times, ch 2, slip st in center between 2 picots, ch 2, slip st back into base sc to complete picot joining, (ch 4, sc in back loop of sc of next B cluster) 3 times, ch 5, slip st back into base so to complete picot, (ch 4, sc in back loop of sc of next B cluster) twice, ch 4, join with a slip st to starting sc, ch 5, slip st back into base sc to complete picot. Fasten off.
FOURTH BLOCK: The fourth block is joined to one side each of both the 2nd and 3rd blocks. Attach A and sc in back loop of sc of B cluster, (ch 4, sc in back loop of sc of next B cluster) 3 times, place daisy back to back with 3rd block, ch 2, slip st in picot on 3rd block, ch 2, slip st back into base sc on 4th block to complete picot joining, (ch 2, slip st in next space on 3rd block, ch 2, sc in back loop of sc of next B cluster on 4th daisy) 3 times, ch 2, slip st in center of the 3 joined picots, ch 2, slip st back into base sc to complete the 4th picot at the joining, (ch 2, slip st in next space on 2nd block, ch 2, sc in back loop of sc of next B cluster on 4th daisy) 3 times, ch 2, slip st in picot on 2nd block, ch 2, slip st back into base sc to complete picot joining, (ch 4, sc in back loop of sc of next B cluster) twice, ch 4, join with a slip st to first sc, ch 5, slip st back into base sc to complete 4th picot. Fasten off.
BODY: Connect 3 rows of 11 blocks across.
SLEEVES: Make 2. Connect 3 rows of 4 blocks across; then join undersleeve seam as you join the rest of the blocks.