Category: Engineering & Technology

The Jacquard Machine Analyzed and Explained With an appendix on the preparation of jacquard cards, and practical hints to learners of jacquard designing

Posselt, E. A. (Emanuel Anthony), 1858-1921· 2 chapters· 36,214 words

lifting of the plunger in a hand-loom, likewise the griffe, etc. This consists of a triangular shaped frame 14-1/4 inches high, or less, according to height of room. This part is fastened to the front part of the frame by bolts at _o_ and _p_. In the slot at the top, between _...

Start readingSearch Amazon editions
MarkdownSource

Chapters

1. Part III. in Fig. I. illustrates the attachment for providing the

lifting of the plunger in a hand-loom, likewise the griffe, etc. This consists of a triangular shaped frame 14-1/4 inches high, or less, according to height of room. This part i...

2. Chapter XII., page 58. After painting in the design, it is finished,

ready for card-stamping. Fig. 93 shows us a leaf, taken from sketch (Fig. 80), which may be used in connection with a larger design, but will clearly illustrate this division of...