The American Electro Magnetic Telegraph With the Reports of Congress, and a Description of All Telegraphs Known, Employing Electricity or Galvanism

Part 1

Chapter 13,480 wordsPublic domain

Transcriber’s Notes:

Underscores “_” before and after a word or phrase indicate _italics_ in the original text. Small capitals have been converted to SOLID capitals. Illustrations and footnotes have been moved so they do not break up paragraphs. Old or antiquated spellings have been preserved. Typographical errors have been silently corrected.

THE AMERICAN ELECTRO MAGNETIC TELEGRAPH:

WITH THE REPORTS OF CONGRESS,

AND A DESCRIPTION OF ALL TELEGRAPHS KNOWN, EMPLOYING ELECTRICITY OR GALVANISM.

ILLUSTRATED BY EIGHTY-ONE WOOD ENGRAVINGS.

BY ALFRED VAIL, ASSISTANT SUPERINTENDENT OF ELEC. MAG. TEL. FOR THE U. S.

CANST THOU SEND LIGHTNINGS, THAT THEY MAY GO, AND SAY UNTO THEE, HERE WE ARE?—JOB.

“The same principle which justified and demanded the transference of the mail on many chief routes, from the horse-drawn coach on common highways to steam-impelled vehicles on land and water, is equally potent to warrant the calling of the electro magnetic telegraph—that last and most wondrous birth of this wonder-teeming age—in aid of the post office, in discharge of its great function of rapidly transmitting correspondence and intelligence.” REP. OF COM. OF WAYS AND MEANS OF H. R., 1845.

PHILADELPHIA: LEA & BLANCHARD. 1845.

ENTERED, according to Act of Congress, in the year 1845, By ALFRED VAIL,

In the Clerk’s Office of the District Court of the United States, in and for the District of Columbia.

CONTENTS.

DESCRIPTION OF THE AMERICAN ELECTRO MAGNETIC TELEGRAPH. PAGE. Introduction, 7 The Galvanic Battery, 9 The Wire, 13 The Electro Magnet, 13 The Register, 18 The Correspondent, 22 The two Dependent Circuits, 23 The two Independent Circuits, 24 The operation of the Electro Magnetic Telegraph, 25 The Telegraphic Alphabet, 27 Specimen of the Telegraphic Language, 28 Telegraphic Alphabets for two, three, four, five, and six pens, operating together, or in succession, 30 Correspondent or Key, 32 The Lever Key, 40 The Circuit of the Electro Magnet, closed and broken by the movement of the Lever itself, acted upon by the Electro Magnet. Showing the rapidity with which it is possible to close and break the Circuit, 41 Conducting Power and Galvanic action of the Earth, 43 Six Independent Circuits, with Six Wires, each wire making an Independent Line of Communication, 44 Mode of Secret Correspondence, 46 Experiments made with 100 pairs of Grove’s Battery, passing through 160 miles of insulated wire, 53 The Galvanometer or Galvanoscope, 57 An Interesting Experiment of supporting a Large Bar of Iron within the Helix, 59 Application of the Electro Magnetic Telegraph to the Determination of Longitude, 59 Mode of Crossing Broad Rivers, or other Bodies of Water Without Wires, 60 Telegraphic Chess Playing, 63 Improvement in the Magneto Electric Machine, and Application of this Instrument to operate the Magnetic Telegraph, 65

REPORTS OF CONGRESS ON THE SUBJECT OF ELECTRO MAGNETIC TELEGRAPHS.

Letter from the Secretary of the Treasury, transmitting a Report upon the Subject of a System of Telegraphs for the United States, December, 11, 1837, 67 Circular to certain Collectors of the Customs, Commanders of Revenue Cutters, and other persons, March 10th, 1837, 68 Letter from S. F. B. Morse to the Secretary of the Treasury, September 27, 1837, 69 Letter from S. F. B. Morse to the Secretary of the Treasury, November 28th, 1837, 73 Letter from S. F. B. Morse to the Editors of the Journal of Commerce, Sept’r 4, 1837, 74 Specimen of Telegraphic Writing made by Means of Electricity, at the distance of one-third of a mile, 75 Report of the Committee on Commerce to the House of Representatives, April 6, 1838, 76 Report of the Franklin Institute, Philadelphia, February 8, 1838, 79 Letter from S. F. B. Morse to the Hon. F. O. J. Smith, February 15, 1838, 80 Letter from S. F. B. Morse to the Hon. F. O. J. Smith, February 22, 1838, 82 Report of the Committee on Commerce to the House of Representatives, Dec’r 30, 1842, 83 A Bill to test the Practicability of Establishing a System of Electro Magnetic Telegraphs by the United States, 87 Letter from Professor Henry to Professor Morse, February 24, 1842, 87 Report of the American Institute on the Electro Magnetic Telegraph, Sept’r 12, 1842, 88 Letter from S. F. B. Morse to the Hon. C. G. Ferris, December 6, 1842, 89 Communication from the Secretary of the Treasury, transmitting the Report of Professor Morse, announcing the Completion of the Electro Magnetic Telegraph, between the Cities of Washington and Baltimore, June 4, 1844, 97 Letter from S. F. B. Morse to Hon. McClintock Young, June 3, 1844, 98 Letter from the Secretary of the Treasury, transmitting a Letter from S. F. B. Morse, relative to the Magnetic Telegraph, December 23, 1844, 101 Letter from S. F. B. Morse to the Hon. G. M. Bibb, December 12, 1844, 101 Report of the Committee of Ways and Means to the House of Representatives, March 3, 1845, 107

HISTORY OF TELEGRAPHS EMPLOYING ELECTRICITY IN VARIOUS WAYS FOR THE TRANSMISSION OF INTELLIGENCE.

Discoveries in Electricity, 115 Electrical Feast on the Schuylkill, 119 Dr. Franklin’s Experiment in Drawing Electricity from the Clouds, 120 Lomond’s Electrical Telegraph, (1787,) 121 Reizen’s Electric Spark Telegraph, (1794,) 121 Dr. Salva’s Electric Spark Telegraph, (1798,) 123 Discovery of Galvanism, (1790,) 123 Discovery of the Decomposition of Water by the Agency of the Galvanic Pile, 125 Samuel Thomas Soemmering’s Voltaic Electric Telegraph, (1809,) 126 Extract from the Journal of the Franklin Institute in relation to the Use of Galvanism for Telegraphic Purposes, (1816,) 128 Ronald’s Electric Telegraph, (1816,) 130 Discovery of Electro Magnetism, (1819,) 132 Extract from a Work on Electro Magnetism, published by Jacob Green, M. D. (1827,) 134 Triboaillet’s Proposition, (1828,) 135 Fechner’s Suggestion, (1829,) 135 Discovery of Magneto Electricity, (1831,) 135 Saxton’s Magneto Electric Machine, 142 Dr. Page’s Magneto Electric Machine, 145 Pole Changer, 149 Morse’s American Electro Magnetic Telegraph, (1832,) 152 Schilling’s Electric Telegraph, (1833,) 155 Gauss and Weber’s Electro Magnetic Telegraph, (1833,) 156 Experiments of Messrs. Taquin & Ettieyhausen, (1836,) 159 Vail’s Electro Magnetic Printing Telegraph, (1837,) 159 Wheatstone’s Electric Needle Telegraph, (1837,) 171 Steinheil’s Electric Telegraph, (1837,) 179 Masson’s Electric Telegraph, (1837,) 182 Davy’s Needle and Lamp Telegraph, (1837,) 182 Alexander’s Electric Telegraph, (1837,) 184 M. Amyot’s Suggestion of an Electric Telegraph, (1838,) 186 Edward Davy’s Electric Telegraph, (1838,) 187 Bain’s Printing Telegraph, (1840,) 199 Wheatstone’s Rotating Disc Telegraph, (1841,) 203

INTRODUCTION.

The propriety of presenting to the public a work of this character, seemed desirable, from the frequent calls made upon the author for some accurate and full description of the American Electro Magnetic Telegraph, which might assist to an intelligible comprehension of the principles upon which it is based, and the mode of its operations, as well as descriptions of those plans now in operation in Europe. In the execution of this task it has been his determination to spare no labour, and to omit nothing that could enable those who had never seen the operation of the telegraph, to obtain a full understanding, of the subject, and also to judge for themselves of the merit of the American invention, as compared with those of Europe. For this purpose eighty-one wood cuts are introduced to illustrate this and collateral subjects.

The various reports of Congress which have been made, from time to time, as the subject of the Electro Magnetic Telegraph has been presented to them, have been embraced in the work. They contain much information in relation to the origin and progress of the invention, as well as other useful matter. In the closing part of the work is given a synopsis of the early discoveries in electricity; the experiment of Franklin, and also the discoveries of ingenious and scientific gentlemen of the present day. The principal part, however, is devoted to a full and complete description of the various plans of telegraphic communication, by means of electricity and galvanism, in the chronological order of their invention; by which it will be seen, that for priority as well as originality, America has the pre-eminence, not only at the time of the invention, but up to the present period; nothing having yet been brought forward that fulfils so completely the conditions of what is signified by the term _telegraph_, as that plan invented by Professor Morse. Some of the foreign plans the author has found extremely difficult to illustrate, without almost re-inventing them, so imperfectly and obscurely have they been described.

The experimental line from Washington to Baltimore has been in successful operation for more than a year, and has been the means of conveying much important information: consisting of messages to and from merchants, members of Congress, officers of the government, banks, brokers, police officers; parties, who by agreement had met each other at the two stations, or had been sent for by one of the parties; items of news, election returns, announcement of deaths, inquiries respecting the health of families and individuals, the daily proceedings of the Senate and House of Representatives, orders for goods, inquiries respecting the sailing of vessels, proceedings of cases in the various courts, summoning of witnesses, messages in relation to special and express trains, invitations, the receipt of money at one station and its payment at the other, for persons requesting the transmission of funds from debtors, consultation of physicians, and messages of every character usually sent by mail.

The author trusts that the work will be received as one of a practical character, and furnish to those desirous to acquaint themselves with the subject, such information as they seek.

ALFRED VAIL. WASHINGTON, D. C. _August 18, 1845_.

THE ELECTRO MAGNETIC TELEGRAPH.

THE GALVANIC BATTERY.

The galvanic battery, the generator of that subtle fluid, which performs so important a part in the operation of the Electro Magnetic Telegraph, is as various in its form and arrangement, as the variety of purposes to which it is applied. They all, however, involve the same principle. It is not our design here to describe the various modes of constructing it, but to confine our remarks more immediately to that used for the Telegraph.

The effects produced by the galvanic fluid upon the metallic bodies, iron and steel, exciting in them the power of attraction or magnetism, its decomposing effects upon liquids, resolving them into their simple elements, its effects upon the animal system, in producing a spasmodic and sudden irritation, are generally well known. But of the character of the fluid itself, its own essence or substance, we know nothing. In some of its phenomena, it resembles the electricity of the heavens; both find a conductor in the metals; both exhibit a spark, and both are capable of producing shocks, or when applied, cause the animal system to be sensible to them. Again, in other of its phenomena it is totally unlike it. The galvanic fluid is essentially necessary in producing the electro magnet; while the electricity of the heavens, or as it is generally termed, _machine electricity_, has no such power for practical purposes. The former is more dense, so to speak, and more easily confined to its conductors, while the latter becomes dissipated and lost in the atmosphere long before it has reached the opposite extremity of a long conductor. The former is continuous in its supply; while the latter is at irregular intervals. The former always needs a continuous conductor; while the latter will pass from one metallic conductor to another without that connection. The latter would not subserve the purposes required in the working of the Electro Magnetic Telegraph, and as it is neither essential nor antagonistical, its presence upon the galvanic conductors or wires, at the same time those wires are being used for telegraphic communication, does in no way interrupt or confuse its operation; and its presence is only known from the suddenness of its discharge at long intervals, accompanied by a bright spark, with a loud crack, like that of a coachman’s whip.

The most simple mode of developing the galvanic fluid is in the following manner: if a common glass tumbler is two-thirds filled with dilute muriatic acid, and a piece of bright zinc, five inches long and one inch wide, immersed in the liquid, at one of its ends, slight action will be discovered upon it. If a slip of copper be then taken, of the same dimensions, and one end immersed in the liquid, but separated from that portion of the zinc immersed, and not permitted to touch it; and the two projecting ends of the zinc and copper, above the liquid be brought in contact, an active decomposition of the muriatic acid will appear.

While the two outer ends are in contact, there is that current formed in the metallic plates, which is termed galvanic. If the contact is broken, the action ceases; if it is again renewed, the action is recommenced. Another very simple experiment, and within the power of every one to demonstrate for themselves, is that of applying a piece of zinc to the underside of the tongue, and to the upperside, a silver coin, and then by bringing their projecting ends in contact, a sensible and curious effect is experienced upon the tongue. It is a feeble galvanic shock, and is proof of the presence of that fluid termed galvanic.

We will now proceed to describe the battery used for telegraphic purposes; the same in principle, but in arrangement more complicated, and far more powerful than those in common use. Two distinct acids are employed; two metals and two vessels. Each part will be described separately, and then the whole, as put together ready for use.

First. A glass tumbler of the ordinary size is used, or about three inches high and two inches and three quarters in diameter.

Second. The zinc cylinder, made of the purest zinc, and cast in an iron mould, represented by figure 1.

It is three inches high, and two inches in diameter. The shell I is three-eighths of an inch in thickness. D is an opening in the cylinder, parallel with its axis, and is of no other use than to aid in the operation of casting them, and facilitating the access of the fluid to the interior. A A represents the body of the cylinder. B is a projecting arm, first rising vertically from the shell, and then projecting horizontally one and three quarters of an inch. To this arm, at C, is soldered a platinum plate of the thickness of tin foil, and hanging vertically from the arm B, as seen at O, and of the form shown in the figure. This constitutes the zinc cylinder and platinum plate, the two metals used in the battery.

Third. The porous cup. To avoid an erroneous impression in the use of the term porous, it will suffice to state, that it is a cup of the form represented by figure 2, made of the same materials as stone-ware, and baked without being _glazed_.[1] A represents the rim surrounding the top. From the under side of the rim to the bottom, it is three inches long, and one and one-quarter in diameter. The rim projects one-quarter of an inch, and the shell of the cup is one-eighth of an inch thick. These several parts are placed together thus. The porous cup, fig. 2, is set in the hollow of the zinc cylinder, fig. 1, represented by H, with the rim of the cup resting upon the top of the zinc at I. The zinc cylinder is then placed in the glass tumbler. The whole is represented in figure 3.

[1] These are made at the American Pottery, in Jersey City, opposite New York.

D represents the porous cup, F the zinc cylinder, G the glass tumbler, A the projecting arm of the zinc, C the platinum plate, and B the over-lapping of the platinum plate upon the zinc arm, where it is soldered to it. It is now in a condition to receive the acids, which are two: first, pure nitric acid, and second, sulphuric acid, diluted in the proportion of one part of sulphuric acid to twelve of water. First fill the porous cup with the nitric acid, to within one-quarter of an inch of the top; then fill the glass with the diluted sulphuric acid, till it reaches to a level with the nitric acid in the porous cup. One glass of the battery is now ready for use, and as all the other members of the battery are similarly constructed, (there being many or few, as circumstances require,) and are to be prepared and filled with their appropriate acids in the same manner, the above description will suffice. There remains, however, some further explanation in regard to the extremities of the series of glasses, that is, the mode of connecting the zinc of the first glass with the wire leading from it, and also the mode of connecting the platinum of the last glass with the wire leading from that end of the series of glasses. Figure 4 represents their arrangement.

The glasses being all separately supplied with their acids, and otherwise prepared, they are put together upon a table, A A, perfectly dry, and made of hard wood. The first member of the series has soldered to its zinc arm a strip of copper, C, which, extending downward, has its end, previously brightened and amalgamated, immersed in a cup of mercury at N. The cup being permanently secured to the table. Then the second glass is taken, and the platinum, B, at the end of the zinc arm, is gently let fall into the porous cup, so that it shall be in the centre of the cup, and reaching down as far as its length, when the glass rests upon the table. The third glass is then taken and placed in the same manner, and so on to the last. The last glass has, in its porous cup, the platinum plate, D, soldered to a strip of copper, E, which is so constructed as to turn at the top, and admit of the easy introduction of the platinum into the porous cup, while the other end of the copper, previously prepared like the copper of the other end of the battery, terminates in a cup of mercury, P. The cup being capable of adjustment, so as to bring the platinum directly over the porous cup; is, when adjusted, secured permanently to the table. The battery, thus arranged, is ready to be applied.

THE WIRE.

The wire used in making helices for the magnets, and for connecting the telegraphic stations, is made of copper of the best quality, and annealed. It is covered with cotton thread, so as to conceal every part of the metallic surface, not so much to prevent corrosion or waste from the action of the atmosphere, as to prevent a metallic contact of one wire with another, when placed near each other. After the wire is covered, it is then saturated with shellac, and then, again, with a composition of asphaltum, beeswax, resin and linseed oil. It is now in a condition to be extended upon the poles. That portion of the wire of which the helices are made is only saturated with shellac.

THE ELECTRO MAGNET.

The electro magnet is the basis upon which the whole invention rests in its present construction; without it, it would entirely fail. As it is of so much importance, a detailed account will be given of the construction of the electro magnet, as used for telegraphic purposes. A bar of soft iron, of the purest and best quality, is taken and made into the form presented in figure 5, which consists of four parts, viz. A F and A F are the two legs or prongs of the magnet,[2] of a rounded form, and bent at the top, approaching each other towards the centre, where the ends of each prong, without touching, turn up, and present flat, smooth and clean surfaces, level with each other at F F. The other end of these prongs or legs is turned smaller than the body, on the end of which is a screw and nut, C C. These ends pass through a plate of iron, B, of the same quality, at I and I, until they rest upon the plate at the shoulder produced by turning them smaller. They are then both permanently secured to the plate, B, by the nuts, C C, and the whole becomes as one piece. This arrangement is made for the purpose of putting on the coils or taking them off with facility. The form most common for electro magnets is that of the horse-shoe; and is simply a bar of iron bent in that form. E represents a small flat plate of soft iron, sufficiently large to cover the faces of the two prongs, F and F, presenting on its under side a surface clean and smooth, and parallel with the faces, F and F.