Category: Engineering & Technology
+----------------------------------+ | | | _The above log which was cut | | by the Sunset Timber Company | | of Raymond, Wash., measured | | thirteen feet, six inches at | | the butt and nine feet, two | | inches at the top. It was | | twenty eight feet long. The | | Seattle C...
This car is constructed with an unusually heavy frame in the superstructure and the underframe is designed to carry the loads from the side to the center construction which is a...
2. Part 2To meet the demand for Trucks of heavier capacity, we are building All-Steel Trucks, which are fully illustrated in the cuts. This design is the result of a careful study of the...
1. Part 1+----------------------------------+ | | | _The above log which was cut | | by the Sunset Timber Company | | of Raymond, Wash., measured | | thirteen feet, six inches at | | the...
3. Part 3Gauge 4 feet, 8½ inches Length over End Sills 42 feet, 0 inches Width over Side Sills 8 feet, 6 inches Height from Rail to top of Deck, 3 feet, 10 inches Standard Height Coupler...
5. Part 5For extremely sharp curves, or say 100 feet radius or less, it is usual to express the curve by feet radius rather than by degrees. The table following is computed by the formul...