Part 1

INDUSTRIAL MINERALS AND METALS OF ILLINOIS

J. E. Lamar

_Illinois State Geological Survey Educational Series 8_

STATE of ILLINOIS

1965

ILLINOIS STATE GEOLOGICAL SURVEY John C. Frye, Chief URBANA, ILLINOIS

Printed by Authority of State of Illinois, Ch. 127, IRS, Par. 58.25.

(15M-4/65-8976) 10

_INDUSTRIAL MINERALS AND METALS OF ILLINOIS_

J. E. Lamar

The mineral resources of Illinois include many rocks and minerals of varied character and uses. From them are made an array of everyday products whose sources may not even be recognized by the consumer. The user of a glass bottle, for instance, rarely knows that it may have been made from Illinois silica sand, nor is the driver of an automobile generally aware that the Illinois concrete highway on which he is driving probably was constructed from a mixture of cement, sand and gravel, or crushed stone that may have come from Illinois pits or quarries.

The significance of these rocks and minerals to the economy of Illinois is great, although often unappreciated. Of the more than 600 million dollar value of all Illinois mineral production in 1963, almost 200 million was from industrial minerals. The diversity and widespread distribution of these mineral resources lend variety and balance to the mineral industry of the state, and their production, processing, and utilization afford direct and indirect employment to many people.

The term industrial minerals is used as a convenient group term for nonmetallic minerals that are not fuels. In Illinois they include limestone, dolomite, clay, shale, silica sand and other sands, fluorspar, tripoli (amorphous silica), ganister, novaculite, sandstone, feldspar-bearing sands, barite, gypsum, anhydrite, brines, greensand, oil shale, marl, peat, humus, and tufa. The metallic minerals of Illinois are galena (lead ore), sphalerite (zinc ore), pyrite, and marcasite.

This booklet briefly and nontechnically discusses the foregoing materials and some of the work the Illinois State Geological Survey does in gathering information about their occurrence, and character and in developing new uses.

The assistance of many Survey staff members and of many people in the Illinois mineral industry in the preparation of this booklet is acknowledged.

LIMESTONE

Limestone is a most versatile rock. Without it there would be no portland cement for making concrete roads and buildings, no lime for plastering and chemical use, no agricultural limestone for farms, and no crushed limestone for driveways. A wide variety of industries, from steel making to glass manufacturing, use limestone in one way or another.

The early settlers of Illinois recognized the value of limestone and quarried stone blocks and slabs for making foundations, chimneys, and even houses. For mortar they used a mixture of sand and lime to hold the blocks together. The lime was made by heating limestone red hot in simple furnaces or kilns, the ruins of a few of which may still be seen.

Kinds of Limestone

Illinois has two principal varieties of limestone, referred to technically as limestone and dolomite. “Limestone” may be used as a general name for both varieties.

Limestone consists principally of crystalline particles of the mineral calcite (fig. 1). This mineral is glassy in appearance and is composed of calcium, carbon, and oxygen combined to form calcium carbonate—CaCO₃. Dolomite is largely made of crystalline particles of the mineral dolomite, which also has a glassy appearance and consists of calcium, magnesium, carbon, and oxygen—CaMg(CO₃)₂. The crystalline particles of limestone and dolomite vary in size. Some are coarse enough to be seen easily, others are so small that they can be distinguished only with a microscope.

Formation of Limestone and Dolomite

Almost all Illinois limestones were formed in seas that covered Illinois millions of years ago. The many different limestone formations in Illinois suggest that oceans covered all or part of the area several times. Numerous kinds of shell fish, corals, and other marine animals lived in these oceans and had shells and other hard parts made of calcium carbonate. Through countless generations, these animal remains accumulated on the ocean floor and gradually were compacted and cemented into limestone (fig. 2).

Other Illinois limestones, however, were formed by the hardening of muds composed mainly of calcium carbonate that accumulated on the floors of the ancient seas. Still other limestones were formed of a combination of animal remains and lime mud.

The coral reefs of the South Pacific Ocean have their counterparts in Illinois. The ancient Illinois oceans contained extensive reefs that were built up just as the modern reefs have been. In northern Illinois, around Chicago for instance, a number of the ancient reefs are now the site of stone quarries. In southwestern Illinois such reefs are a source of petroleum.

The dolomites of Illinois probably were originally limestones, but, either while the limestones were still beneath the sea or after the sea had withdrawn, magnesium was exchanged for some of the calcium in the limestones. If the exchange took place under the sea, the sea water was the source of the magnesium. If it happened when the limestones were a part of the land, the magnesium was brought in by water circulating through the rock. Many of the marine animal fossils became difficult to recognize after the change, and the texture and general appearance of the rock also were altered. Some of it became noticeably porous.

Uses of Limestone and Dolomite

Some of the major uses for Illinois limestone and dolomite are mentioned below. Not every limestone or dolomite can be used for all purposes because for each use the stone must fulfill special requirements of a chemical or physical nature. For example, it must have high purity for lime, resistance to wear and weather for roads and buildings, and a pleasing appearance for decorative stone and marble.

_Lime._—When limestone or dolomite is heated to a high temperature, it undergoes a change and carbon dioxide is liberated. The weight of the gas set free is equal to somewhat less than half the weight of the rock if the rock is pure. The solid product remaining after the gas has been driven off is known as lime. The heating process is called burning.

Besides being used in making mortar and plaster, lime is valuable in many other ways, especially in various chemical processes of modern industry. Plants at Chicago and Quincy make lime from Illinois limestone and dolomite.

_Cement._—Portland cement, sometimes called simply cement, is made at LaSalle, Oglesby, and Dixon in northern Illinois from limestone and a smaller, carefully measured amount of clay or shale. Cement also is made at Joppa in southern Illinois. The blend of materials is thoroughly ground and mixed, then heated at a high temperature in huge rotating horizontal furnaces, called kilns, until it forms a clinker. After it cools, the clinker is ground to a flourlike powder. This is basically the cement that binds together the mixture of sand and limestone (or dolomite), or of sand and gravel, to make the concrete from which roads, bridges, buildings, and other structures are made.

_Aggregate._—The crushed stone used in making concrete is known as concrete aggregate. This is a major use for Illinois limestones and dolomites. Large amounts of stone aggregate also are used in bituminous roads, popularly called “blacktop” roads.

_Agricultural Uses._—Agricultural limestone (agstone) is applied to farm land to neutralize soil acids and otherwise benefit the soil. Both limestone and dolomite are so used. Chickens are fed small limestone chips to provide calcium for the formation of egg shells. Pigs and cows get calcium from mineral supplements containing powdered pure limestone.

_Other Uses._—Illinois limestone or dolomite is used in steel making, as building stone and marble, as road stone, as ballast for the road beds of railroad tracks, for making refractory dolomite used in the steel industry, and for a variety of less common uses.

Quarries

There are about 200 stone quarries in Illinois. Most of the larger quarries (fig. 3) are in the Chicago, Joliet, Kankakee, and East St. Louis areas, but one or more limestone or dolomite quarry occurs in many counties.

If all the stone taken from Illinois quarries in 1963 were removed from a hole 100 feet square, the hole would penetrate into the earth about 8 miles. It would take more than 350,000 railroad cars holding 100 tons each to haul away the stone. Limestone, dolomite, and their products added over 80 million dollars to the economy of the state in 1963, approximately 8 dollars for each person in Illinois.

Most Illinois limestone and dolomite is quarried from open pits, but in some places, as in the rocky bluffs along the Mississippi River, the stone is taken from underground mines (fig. 4). There is also a dolomite mine in Chicago. At the quarries the first step is the removal of the earth overlying the stone. Next, in both pit and mine, the stone is blasted to free it from the parent deposit and break it into pieces. Mechanical shovels (fig. 3) load the stone into trucks that take it to the crushing plant where powerful crushers further break the stone into pieces. The pieces are sorted into various sizes by large screens. At some of the plants, the stone is ground into powder.

Location of Limestone Deposits

The geologic map of Illinois prepared by the Illinois State Geological survey shows, with reasonable exactness, what bedrock formations would crop out at the surface if the overlying clay, sand, gravel, and earth were removed. Thick dolomite formations would be exposed in much of the northern fifth of the state, but would be rare elsewhere. Thick limestone formations would occur in an almost continuous zone, varying in width from 3 to 25 miles, along the Mississippi River from Rock Island to southern Illinois and then eastward across the extreme southern tip of the state. Limestone also would be seen along the Illinois River from Havana southward.

In the central area of the state, limestones are present, but they are rarely over 25 and often less than 15 feet thick. Consequently, most of the larger quarries are in the northern, western, and southern parts of Illinois. The thinner limestones, nonetheless, are of much importance and are quarried at many places, chiefly to provide agricultural limestone, road stone, and limestone for making cement.

The Geological Survey locates and maps limestone and dolomite deposits and analyzes and tests samples to determine the best possible uses for the stone. Many reports have been published about the character and general use of the deposits in various parts of the state. Other reports deal with the use of limestone and dolomite for specific purposes such as cement making, building and decorative stone, rock wool, terrazzo chips, and lime.

METALLIC ORES AND FLUORSPAR

Lead and Zinc

Lead mining was one of the earliest industries of Illinois. The early settlers’ need for bullets for procuring food and for defense of their lives and property made lead an important commodity, and the deposits of lead ore in the northwestern corner of Illinois were quickly exploited. The ore was the mineral galena (fig. 5), for which the city of Galena in Jo Daviess County is believed to have been named.

Galena is a dark, shiny mineral that breaks readily into cubes or combinations of cubes. It is composed of lead and sulfur (PbS). Galena itself is not suitable for use as a metal; the lead must first be separated from the sulfur.

The earliest method of recovering lead from galena was crude. A pile of logs, smaller pieces of wood, and ore was built on sloping ground. Just below it a pit was dug. When the wood was set on fire, the heat caused the lead and sulfur to separate, and the molten lead trickled down into the pit. The smelting process was later improved, and stone “furnaces” were built to house the operations.

_Crevice Deposits and Residual Deposits._—Most of the lead ore mined in the early days of the northwestern Illinois mining district came from crevice deposits in the dolomite bedrock and from residual deposits at or near the surface of the ground. The crevices were vertical narrow joints or fissures. Ore was not continuously present along them but occurred from place to place in “pods” (fig. 6 and fig. 7). Dimensions of the pods varied, but typical ones were about 3 feet wide, 5 feet high, and a few to a few hundred feet long. The galena, for the most part, occurred in a mixture of clay and weathered dolomite that filled, or partly filled, the crevices.

The residual deposits were found where the action of the weather for many thousands of years had dissolved the dolomite from the outcropping parts of a crevice deposit and left behind a residue of brown or red clay containing galena.

Some of the crevice and residual deposits worked by the early miners cropped out at the surface, but most of them were covered by earth. Other crevices were exposed in the bluffs of the Mississippi River and extended back into them for 1,000 feet or more.

SOIL A GALENA CLAY AND ROTTED DOLOMITE B GALENA CLAY AND ROTTED DOLOMITE DOLOMITE

When the richer deposits of ore in the crevices were worked out, some mines were deepened into the dolomite bedrock, but usually less rather than more galena was found.

As the amount of galena decreased, however, another mineral, which had been present before in only small amounts, was found in increasing quantities. This was sphalerite—a yellow, brown, or black mineral of resinous appearance that is composed of zinc and sulfur (ZnS). It does not look like a metallic ore.

At first the sphalerite was not used because there were no smelters in the area that could separate the zinc from the sulfur with which it was combined in the ore. Between 1850 and 1870, however, smelters were built in northwestern Illinois and southern Wisconsin and the ore was shipped there. Sphalerite is now the principal ore mineral produced in northwestern Illinois.

The sphalerite and galena of southern Illinois, described later, are similar to that found in northwestern Illinois.

_Mining and Milling._—One large mine is producing zinc and lead near Galena at present. Smaller mines operate irregularly. The ore may occur as pockets, irregularly shaped rather flat masses, vertical or inclined veins (fig. 8), or small particles scattered through the dolomite. The principal ore bodies that have been worked in recent years have been of irregular shape, both horizontally and vertically, and usually have been between 50 and 200 feet wide and from a few to as much as 100 feet high. They lie at a depth of roughly 300 feet.

Blasting is required to loosen and break the ore. At the large mine the ore is brought to the surface by a hoist. In some relatively shallow mines an inclined tunnel has been driven to the ore body and the ore brought to the surface in trucks.

ORE PITCHES FLATS

Because the ore consists of galena and sphalerite attached to and scattered through dolomite, it must be milled to free and separate the metals from the rock. Crushing, grinding, and other operations are involved. The dolomite is discarded and the galena and sphalerite concentrates are shipped away to be smelted. No smelters have operated in the Galena area for some time.

_Aids to Prospecting._—Finding deposits of ore 300 feet underground is not easy. Inspection of the surface usually tells little. To find and outline a commercial ore deposit many holes often must be drilled to explore the unexposed rock strata. Because this is a costly process, every possible means is employed to drill the holes where ore is most likely to be found. This is where geologists are useful—geologists of the mining companies and of the Illinois Geological Survey. Three examples of how their investigations help to find ore are given here.

It was noted early in the development of the northwestern Illinois mining district that zinc ore deposits were most common along small downfolds in the bedrock, called synclines, that were a few hundred feet wide and a mile or so long. The synclines were associated with much larger synclines that extended for several miles. A map prepared by the Illinois Geological Survey shows the possible location and extent of many of these downfolds and has had much practical use in the selection of the most promising areas for test drilling to find ore.

The Survey also collects the records of borings made by companies and individuals in their search for ore. The records are on permanent file at the Survey offices and are valuable in several ways. Some indicate where no ore was found and where it is, therefore, useless to drill further; others show only traces of ore but suggest that more drilling in the vicinity might discover a deposit large enough to be mined profitably. Still other records are of borings that encountered rich ore in which mines have been developed.

The third aid to prospecting is the study of ore bodies and their minerals to determine how the deposits were formed. The ore bodies have been and are being studied in the mines. Ore specimens are carefully examined in the Survey laboratories. If geologists can learn how the known deposits were formed, it may be possible to direct exploration into promising new areas.

Fluorspar

In the southeastern tip of Illinois lie deposits of a mineral that contains the chemical element fluorine. This element is used in making the propellant that activates aerosol sprays, a plastic that resists chemicals and oil and is strong enough to be used for bearings, compounds that are said to help to prevent tooth decay, and many other useful chemicals.

The mineral is fluorite (fig. 9), commonly called fluorspar. It is composed of calcium fluoride (CaF₂), a compound of calcium and fluorine, and is a glassy mineral that is generally white or gray but may be purple, rose, yellow, blue, or green. In rare instances it is colorless.

Fluorspar mining in Hardin and Pope Counties began with lead mining. Galena was first discovered there in 1839 in a well being dug at the town of Rosiclare. Mining of galena began in the early 1840’s, and somewhat later ore was being smelted by three furnaces, all of which have long since disappeared.

The veins that were worked for galena also contained fluorspar, but as there was little or no use for fluorspar in the 1840’s it was considered waste. In time, uses developed, however, and about 1870 it was mined and shipped in commercial quantities. Since then the tonnage and value of the fluorspar produced from the Rosiclare area have increased until fluorspar is the major product.

The fluorspar mining district north of the town of Cave in Rock in eastern Hardin County also was an early producer of galena. In that area the fluorspar-galena deposits are elongate and approximately flat. The first miners followed the ore bodies from outcrops by tunneling into the hillsides. In the late 1930’s and early 1940’s, many holes were drilled into the bedrock in search of new deposits. Ore was found that contained not only galena and fluorspar but also important amounts of sphalerite.

_Vein Deposits._—In the Rosiclare district, the fluorspar and its accompanying minerals occur as steeply inclined veins a few inches to 25 feet or more wide (fig. 10), usually in limestone strata. The veins are not uniformly thick but widen or narrow from place to place both vertically and horizontally. They occur along faults—planes along which the rocks of the earth’s crust have broken and slipped. A fault may be a single plane of slippage but more often is a zone of broken and displaced rocks. In most of the faults that contain fluorspar, the slippage is vertical, or nearly so. Along one of the faults in the Rosiclare district, the rocks on one side of the fault have moved downward as much as 650 feet in relation to the rocks on the other side. Some faults are more than 10 miles long, and the depth to which they extend into the earth is unknown. Fluorspar has been mined from one of them at depths of 800 feet. Not all faults, nor all parts of any one fault, contain fluorspar.

SOIL FAULT FLUORSPAR VEIN ALONG FAULT down SANDSTONE A LIMESTONE B SHALE C SANDSTONE D LIMESTONE E up LIMESTONE B SHALE C SANDSTONE D LIMESTONE E

_Bedding Deposits._—In contrast to the vein deposits of the Rosiclare district, the bedding deposits of the Cave in Rock area are flat, or nearly flat, commonly 5 to 15 feet thick, and from a few to 200 feet wide (fig. 11). They may be as much as 2000 feet long, widening or narrowing and thickening or thinning throughout their extent. They are called bedding deposits because they lie along the beds or layers of the limestone in which they occur. Most of the ore bodies are associated with a fracture or a small fault.

SOIL SANDSTONE AND SHALE ORE LIMESTONE FRACTURE OR SMALL FAULT

_Grades and Uses of Fluorspar._—There are three principal grades of fluorspar—metallurgical, acid, and ceramic. The metallurgical spar is used as a flux in making steel and in metal foundries. Acid spar is used to make hydrofluoric acid, which plays a part in the preparation of uranium isotopes and in the production of a synthetic mineral essential in refining aluminum. The acid is also used in the production of high-octane gasoline and is the basis for a variety of important chemical compounds, among them refrigerants and insecticides. Ceramic grade fluorspar is used in making enamels, glazes, and certain kinds of glass.