Category: Engineering & Technology
[Transcriber's notes] Page numbers in this book are indicated by numbers enclosed in curly braces, e.g. {99}. They have been located where page breaks occurred in the original book.
A Driving Pulley, 8 in. to 18 in. dia., advancing by 1/2 in. increments, 3-1/4 in. face. A1 Cylinder Gear, 21, 25, 29, 30, 39 and 49 T. A2 Cylinder, 7 in. and 8 in. dia. B Jack...
3. Part 3Licker-in Driving Pulley, 19 in. dia. Licker-in Driven Pulley, 7 in. dia. Barrow Gear Driving Pulley. 6 in. dia. Barrow Gear Driven Pulley, 9 in. dia. Doffer Lever Intermediate...
4. Part 4It is difficult to give hard and fast rules for figuring the Taper and Tension Gears, as the required number of teeth on these gears is affected by the kind of stock, length of...
1. Part 1[Transcriber's notes] Page numbers in this book are indicated by numbers enclosed in curly braces, e.g. {99}. They have been located where page breaks occurred in the original b...
2. Part 2Self-feeding Openers when built as separate machines can be placed on any floor above or below the Breaker Lappers, or on the same floor, the connections being made by Automatic...
6. Part 6Ring Mule Total Maine 764,064 214,124 978,188 New Hampshire 1,045,283 275,220 1,320,503 Vermont 80,688 26,636 107,324 Massachusetts 7,060,977 2,385,403 9,446,380 Rhode Island 1,...