Part 28

Such nets are set under the ice in winter, or in shoal water along the shore by means of stakes in summer. In the ordinary method of setting the net under the ice two small holes are cut through the ice the length of the net apart, and between them in the same straight line is cut a third large enough to permit a seal to be drawn up through it. A line with a plummet on the end is let down through one of the small holes, and is hooked through the middle hole, with a long slender pole of willow, often made of several pieces spliced together, with a small wooden hook on the end. The line is then detached from the plummet and fastened to one upper corner of the net, and a second line is let down through the other small hole and made fast in the same way to the other upper corner. By pulling on these lines the net is drawn down through the middle and stretched like a curtain under the ice, while a line at the middle serves to haul it up again. The end lines are but loosely made fast to lumps of ice, so that when a seal strikes the net nothing hinders his wrapping it completely around him in his struggles to escape. When the hunter, who is usually watching his net, thinks the seal is sufficiently entangled he hauls him up through the large hole and sets the net again.

I had no opportunity of observing whether any weights or plummets were used to keep down the lower edge of the net. These nets are now universally employed, but one native spoke of a time “long ago” when there were no nets and they captured seals with the spear (u´nɐ) alone. The net was used in seal catching in Dr. Simpson’s time, though he makes but a casual reference to it,[N347] and Beechey found seal nets at Kotzebue Sound in 1826.[N348] The net is very generally used for sealing among the Eskimo of western America and in Siberia. We observed seal nets set with stakes along the shore of the sandspit at Plover Bay, and Nordenskiöld speaks of seal nets “set in summer among the ground ices along the shore,”[N349] and at open leads in the winter, but gives no description of the method of setting these nets beyond mentioning the “long pole which was used in setting the net,”[N350] as none of his party ever witnessed the seal fishery.[N351] I am informed by Mr. W. H. Dall that the winter nets in Norton Sound are not set under the ice as at Point Barrow, but with stakes in shoal water wherever there are open holes in the ice. “Ice nets” are spoken of as in use for sealing in Greenland, but I have been able to find no description of them. As they are not spoken of by either Egede or Crantz I am inclined to believe that they were introduced by the Europeans.[N352] Mr. L. M. Turner informs me that such is the case at Ungava Bay on the southern shore of Hudson Strait, where they use a very long net set under the ice very much as at Point Barrow. I can find no mention of the use of seal nets among any other of the eastern Eskimo.

[Footnote N347: Op. cit., p. 262.]

It is well known that seals have a great deal of curiosity, and are easily attracted by any unusual sounds, especially if they are gentle and long-continued. It is therefore easy to entice them into the nets by making such noises, for instance, gentle whistling, rattling on the ice with the pick, and so forth. Two special implements are also used for this purpose. The first kind I have called:

[Footnote N348: Voyage, pp. 295, 574.]

[Footnote N349: Vega, vol. 2, p. 108.]

[Footnote N350: Ibid., p. 98.]

[Footnote N351: See also the reference to Hooper’s Corwin Report, quoted below under Hunting.]

[Footnote N352: See, however, the writer’s paper in the American Anthropologist, vol. 1, p. 333.]

_Seal calls_ (adrigautĭn).--This implement consists of three or four claws mounted on the end of a short wooden handle, and is used to make a gentle noise by scratching on the ice. It is a common implement, though I never happened to see it in use. We obtained six specimens, of which No. 56555 [90] Fig. 253_a_, is the type. It is 11½ inches long. The round handle is of ash, the claws are those of the bearded seal, secured by a lashing of sinew braid, with the end brought down on the under side to a little blunt, backward-pointing hook of ivory, set into the wood about 1 inch from the base of the arms.

Fig. 253_b_ (No. 56557 [93] from Utkiavwĭñ is 9½ inches long and has four prongs. The haft is of spruce, and instead of an ivory hook there is a round-headed stud of the same material, which is driven wholly through the wood, having the point cut off flush with the upper surface. It has a lanyard of seal twine knotted into the hole in the haft. The other two specimens of this pattern, Nos. 56556 [100] and 56558 [51] have each three claws, and hafts of soft wood, painted with red ocher, with lanyards, and are respectively 10.4 and 10.7 inches long. One has an ivory hook, but the other in place of this has a small iron nail, and is ornamented with a medium-sized sky-blue glass bead inlaid in the back. The other two are both new and small, being respectively 7.5 and 7.6 inches long. The hafts are made of reindeer antler and have only two prongs. No. 89467 [1312] from Utkiavwĭñ, has the haft notched on each side, and has an irregular stud of bone for securing the lashing.

No. 89468 [1354], Fig. 253_c_, from Utkiavwĭñ, has no stud and the claws are simply held on by a slight lashing of twisted sinew. Both of these were made for the market, but may be models of a form once used. There are two old seal calls in the Museum from near St. Michaels, made of a piece of reindeer antler, apparently the spreading brow antler, in which the sharp points of the antler take the place of claws. The use of this implement, as shown by Mr. Nelson’s collection, extends or extended from Point Barrow to Norton Sound. He collected specimens from St. Lawrence Island and Cape Wankarem in Siberia. Nordenskiöld speaks of the use of this implement at Pitlekaj and figures a specimen.[N353] The other instrument appears to be less common. I have called it a seal rattle.

[Footnote N353: Vega, vol. 2, p. 117, Fig. 3.]

_Seal rattle._--We obtained only two specimens, No. 56533 [409], which seem to be a pair. Fig. 254 is one of these. It is of cottonwood and 4 inches long, roughly carved into the shape of a seal’s head and painted red, with two small transparent blue glass beads inlaid for the eyes. The neat becket of seal thong consists of three or four turns with the end wrapped spirally around them. The staple on which the ivory pendants hang is of iron. This is believed to be a rattle to be shaken on the ice by a string tied to the becket for the purpose of attracting seals to the ice net. It was brought in for sale at a time during our first year when we were very busy with zoological work, and as something was said about “nĕtyĭ” and “kubra” (“seal” and “net”) the collector concluded that they must be floats for seal nets, and they were accordingly catalogued as such and laid away. We never happened to see another specimen, and as these were sent home in 1882 we learned no more of their history. The late Dr. Emil Bessels, however, on my return called my attention to the fact that in the museum at Copenhagen there is a single specimen very similar to these, which was said to have been used in the manner described above. It came from somewhere in eastern America. There is one, he told me, in the British Museum from Bering Strait. The National Museum contains several specimens collected by Mr. Nelson at Point Hope. It is very probable that this is the correct explanation of the use of these objects, as it assigns a function to the ivory pendants which would otherwise be useless. They have been called “dog bells,” but the Eskimo, at Point Barrow, at least, are not in the habit of marking their dogs in any way.

_Seal indicators._--When watching for a seal at his breathing hole a native inserts in the hole a slender rod of ivory, which is held loosely in place by a cross piece or a bunch of feathers on the end. When the seal rises he pushes up this rod, which is so light that he does not notice it, and thus warns the hunter when to shoot or strike with his spear. Most of the seal hunting was done at such a distance from the station that I remember only one occasion when this implement was seen in use. We collected two specimens, of which No. 56507 [104], Fig. 255_a_, will serve as the type. It is of walrus ivory, 14½ inches long and 0.3 in diameter, with a small lanyard of sinew. The curved cross piece of ivory, 1⅓ inches long, is inserted into a slot one-fourth of an inch from the end and secured by a little treenail of wood.

Fig. 255_b_ (No. 89454 [1114], from Nuwŭk) is a similar indicator, 13½ inches long and flat (0.3 inch wide and 0.1 thick). The upper end is carved into scallops for ornament and has a small eye into which was knotted a bit of whalebone fiber. The tip is beveled off with a concave bevel on both faces to a sharp edge, so that it can be used for a “feather setter” (ĭgugwau) in feathering arrows. Such implements are mentioned in most popular accounts of the Eskimo of the east, and Capt. Parry describes it from personal observation at Iglulik.[N354] I have been unable to find any mention of its use in western America, and have seen no specimens in the National Museum.

_Sealing stools._--When a native is watching a seal-hole he frequently has to stand for hours motionless on the ice. His feet would become exceedingly cold, in spite of the excellence of his foot covering, were it not for a little three-legged stool about 10 inches high upon which he stands. This stool is made of wood, with a triangular top just large enough to accommodate a man’s feet, with the heels together over one leg of the stool, and the other two legs supporting the toes of each foot, respectively. The stool is neatly made, and is as light as is consistent with strength. It is universally employed and carried by the hunter, slung on the gun cover with the legs projecting behind.

When the hunter has a long time to wait he generally squats down so as almost to sit on his heels, holding his gun and spear in readiness, and wholly covered with one of the deerskin cloaks already described. They sometimes use this stool to sit on when waiting for ducks to fly over the ice in the spring.

[Footnote N354: Second Voyage, p. 510; also pl. opposite p. 550, Fig. 17.]

We brought home two specimens of this common object (nĭgawaúotĭn). No. 89887 [1411], Fig. 250, will serve as the type. The top is of spruce, 8¾ inches long and 10¾ wide. The upper surface is flat and smooth, the lower broadly beveled off on the edges and deeply excavated in the middle, so that there are three straight ridges joining the three legs, each of which stands in the middle of a slight prominence. The object of cutting away the wood in this way is to make the stool lighter, leaving it thick only at the points where the pressure comes. The large round hole in the middle, near the front, is for convenience in picking it up and hanging it on the cache frame, where it is generally kept. The three legs are set into holes at each corner, spreading out so as to stand on a base larger than the top of the stool. Where they fit into the holes they are 0.7 inch in diameter, tapered slightly to fit the hole, and then tapering down to a diameter of one-third inch at the tip. On the under side of the top they are braced with a lashing of stout seal thong. A split on the right-hand edge of the top has been mended, as usual, with a stitch of whalebone. This stool is quite old and has been actually used.

No. 89888 [1412], from the same village, is new and a little larger, but differs from the type only in having a triangular instead of a round hole in the top and no lashing. Those of our party who landed at Sidaru September 7, 1881, saw one of these stools hanging up in the then vacant village, and there is a precisely similar stool in the Museum from the Anderson region.

MacFarlane, in his manuscript notes, describes the use of these stools as follows: “Both tribes kill seals under ice; that is, they watch for them at their holes (breathing) or wherever open water appears. At the former they generally build a small snow house somewhat like a sentinel’s box, on the bottom of which they fix a portable three-cornered stool, made of wood. They stand on this and thereby escape getting cold feet, as would be the case were they to remain for any time on ice or snow in the same immovable position.” Beyond this I find no mention of the use of any such a utensil, east or west, except in Greenland, where, however, they used a sort of one-legged chair to sit on, as well as a footstool, which Egede pictures (Pl. 9) as oval, with very short legs.[N355]

[Footnote N355: “They first look out for Holes, which the Seals themselves make with their Claws about the Bigness of a Halfpenny; after they have found any Hole, they seat themselves near it upon a Chair, made for the Purpose; and as soon as they perceive the Seal coming up to the Hole and put his snout into it for some Air, they immediately strike him with a small Harpoon.” Egede, Greenland, p. 104.

“The seals themselves make sometimes holes in the Ice, where they come and draw breath; near such a hole a Greenlander seats himself on a stool, putting his feet on a lower one to keep them from the cold. Now when the seal comes and puts its nose to the hole, he pierces it instantly with his harpoon.” Crantz, History of Greenland, vol. 1, p. 156.]

_Seal drags (uksiu´tiñ.)_--Every seal hunter carries with him a line for dragging home his game, consisting of a stout thong doubled in a bight about 18 inches long, with an ivory handle or knob at the other end. The bight is looped into an incision in the seal’s lower jaw, while the knob serves for attaching a longer line or the end of a dog’s harness. The seal is dragged on his back and runs as smoothly as a sled. We collected eight of these drag lines, from which I have selected No. 56624 [44], Fig. 257_a_, as the type.

This consists of a stout thong of rawhide (the skin of the bearded seal) 0.3 inch wide and 37 inches long, and doubled in a bight so that one end is about 2½ inches the longer. These ends are fastened into a handle of walrus ivory, consisting of three pieces, namely: a pair of neatly carved mittens, respectively 1.9 and 1.8 inches long, put together wrist to wrist with the palms up; and lying across the joint above, a little seal 1¼ inches long, belly down. A hole runs through each wrist and through the belly of the seal. The mittens are ornamented on the back with a blackened incised pattern, and the seal has blue glass beads for eyes and blackened incised spots on the back. The longer end of the thong runs up through the right mitten, across through the seal, and down through the left mitten. It is then passed through a slit 1 inch from the end of the shorter part and slit itself. Through this slit is passed the bight of the thong, all drawn up taut and seized with sinew braid.

No. 89467 [755], from Utkiavwĭñ, is a similar drag, put together in much the same way, but it has the mittens doweled together with two wooden pins, and a seal’s head with round bits of wood inlaid for eyes, ears, and nostrils, in place of the seal. The longitudinal perforation in this head shows that it was originally strung lengthwise on one of these lines. The “double slit splice” of the two ends of the thong is worked into a complicated round knot, between which and the handle the two parts of the line are confined by a tube of ivory 1 inch long, ornamented with deeply incised patterns. Fig. 257_b_ is the upper part of a line (No. 56622 [36], from Utkiavwĭñ), with a similar tube 1¾ inches long, and a handle carved from a single piece into a pair of mittens like the others.

No. 56625 [81], also from Utkiavwĭñ, is almost exactly similar to the one first described, but has the seal belly up. Fig. 257_c_ (No. 89470 [1337], from the same village) has a seal 2.3 inches long for the handle, and No. 56626 [212], from Utkiavwĭñ, is like it. No. 89469_a_, [755_a_] Fig. 257_d_, from Utkiavwĭñ, has for a handle the head of a bearded seal 1.6 inches long, neatly carved from walrus ivory, with round bits of wood inlaid for the eyes and ears. It is perforated longitudinally from the chin to the back of the head, and a large hole at the throat opens into this. The longer end of the thong is passed in at the chin and out at the back of the head; the shorter, in at the back of the head and out at the throat; the two ends brought together between the standing parts and all stopped together with sinew braid.

No. 56627 [45], Fig. 257_e_, has a handle made of two ivory bears’ heads, very neatly carved, with circular bits of wood inlaid for eyes, and perforated like the seal’s head just described. The thong is doubled in the middle and each end passed through one of the heads lengthwise, so as to protrude about 7 inches. About 4 inches of end is then doubled over, thrust through the throat hole of the opposite head, and brought down along the standing parts. All the parts are stopped together with sinew braid. This makes a small becket above the handle.

We collected seven knobs for these drag lines, of which six are seals’ heads and one a bear’s. They are all made of walrus ivory, apparently each a single tooth, and not a piece of tusk, and are about 1½ inches to 2 inches long. They are generally carved with considerable skill, and often have the ears, roots of the whiskers, nostrils, and outline of the mouth incised and blackened, while small blue beads, bits of ivory, or wood are inlaid for the eyes. Implements of this sort are in common use among Eskimo generally wherever they are so situated as to be able to engage in seal-hunting. Mr. Nelson’s collection contains specimens from as far south as Cape Darby.

_Whalebone wolf-killers (ĭsĭbru)._--Before the introduction of the steel traps, which they now obtain by trade, these people used a peculiar contrivance for catching the wolf. This consists of a stout rod of whalebone about 1 foot long and one-half inch broad, with a sharp point at each end. One of these was folded lengthwise in the form of a Z,[N356] wrapped in blubber (whale’s blubber was used, according to our informant, Nĭkawáalu), and frozen solid. It was then thrown out on the snow where the wolf could find and swallow it. The heat of the animal’s body would thaw out the blubber, releasing the whalebone, which would straighten out and pierce the walls of the stomach, thus causing the animal’s death. Nikawáalu says that a wolf would not go far after swallowing one of these blubber balls.

[Footnote N356: It is twisted into “a compact helical mass like a watch-spring” in the Hudson Bay region. Schwatka, “Nimrod in the North,” p. 133. See also Klutschak, “Als Eskimo,” pp. 194, 195.]

We collected four sets of these contrivances, one set containing seven rods and the others four each. Fig. 258_a_ gives a good idea of the shape of one of these. It belongs to a set of seven, No. 89538 [1229], Fig. 258_b_, from Utkiavwĭñ, which are old and show the marks of having been doubled up. It is 12½ inches long, 0.4 broad, and 0.2 thick. The little notches on the opposite edges of each end were probably to hold a lashing of sinew which kept the folded rod in shape while the blubber was freezing, being cut by thrusting a knife through the partially frozen blubber, as is stated by Schwatka.[N357] Two of the sets are new, but made like the others.

[Footnote N357: “Nimrod in the North,” p. 133.]

[Footnote N358: See Gilder, Schwatka’s Search, p. 225; see also, Klutschak, “Als Eskimo,” etc., pp. 194-5, where the whalebones are said to have little knives on the ends.]

This contrivance is also used by the Eskimo of Hudson Bay[N358] and at Norton Sound, where, according to Petroff,[N359] the rods are 2 feet long and wrapped in seal blubber. The name ĭsĭ´bru appears to be the same as the Greenlandic (isavssok), found only in the diminutive isavssoraĸ, a provincial name for the somewhat similar sharp-pointed stick baited with blubber and used for catching gulls. The diminutive form of this word in Greenlandic may indicate that their ancestors once used the large wolf-killer, when they lived where wolves were found. The definition of uju´kuaĸ, the ordinary word for the gull-catcher (see below)--in the Grønlandske Ordbog--is the only evidence we have of the use of this contrivance in Greenland. This is one of the several cases in which we only learn of the occurrence of customs, etc., noted at Point Barrow, in Greenland, by finding the name of the thing in question defined in the dictionary.

[Footnote N359: Report, etc., p. 127.]

_Traps._--Foxes are caught in the winter by deadfalls or steel traps (nänori´a), set generally along the beach, where the foxes are wandering about in search of carrion thrown up by the sea. In setting the deadfalls a little house about 2 feet high is built, in which is placed the bait of meat or blubber. A heavy log of driftwood is placed across the entrance, with one end raised high enough to allow a fox to pass under it, and supported by a regular “figure of four” of sticks. The fox can not get at the bait without passing under the log, and in doing so he must touch the trigger of the “figure of four” (#4#), which brings down the log across his back. When a steel trap is used it is not baited itself, but buried in the snow at the entrance of a similar little house, so that the fox can not reach the bait without stepping on the plate of the trap and thus springing it. Many foxes are taken with such traps in the course of the winter.

The boys use a sort of snare for catching setting birds. This is simply a strip of whalebone made into a slip-noose, which is set over the eggs, with the end fastened to the ground, so that the bird is caught by the leg. Once or twice, when there was a light snow on the beach, we saw a native catching the large gulls as follows: He had a stick of hard wood, pointed at each end, to the middle of which was fastened one end of a stout string about 6 feet long. The other end was secured to a stake driven into the frozen gravel, and the stick wrapped with blubber and laid on the beach, with the string carefully hidden in the snow. The gull came along, swallowed the lump of blubber, and as soon as he tried to fly away the string made the sharp stick turn like a toggle across his gullet, the points forcing their way through, so that he was held fast. A similar contrivance, but somewhat smaller and made of bone, is used at Norton Sound for catching gulls and murres, a number of them being attached to a trawl line and baited with fish. Mr. Nelson collected a large number of these.[N360] In regard to the use of this contrivance in Greenland, see above under “wolf-killers.”

[Footnote N360: See Dr. Rau’s Prehistoric Fishing, p. 12. Fig. 2, p. 13, represents one of these from Norton Sound, and Figs. 3-8, a series of similar implements from the bone caves of France.]