PART III.

WORKING DRAWINGS.

PROJECTS FOR BEGINNING WOODWORK AND MECHANICAL DRAWING.

LIST OF PLATES.

GROUP I.

1. Cutting board.

GROUP II.

2. Counting board. 3. Coat and Hat rack. 4. Key-rack.

GROUP III.

5. Ringtoss. 6. Spool holder. 7. Game board. 8. Laundry register.

GROUP IV.

9. Sleeve board. 10. Bread board. 11. Cake board. 12. Scouring board. 13. Coat hanger.

GROUP V.

14. Nail box. 15. Knife polishing box. 16. Knife and fork box. 17. Bird house. 18. Broom holder. 19. Bench-hook.

GROUP VI.

20. Teapot blocks. 21. Thermometer back. 22. Calendar mount. 23. Card holder. 24. Bill file. 25. Handkerchief box. 26. Glove box.

GROUP VII.

27. Groove joint. 28. Book-rack. 29. Necktie rack. 30. Magazine rack. 31. Footstool. 32. Paper or magazine wall rack. 33. Wall shelf. 34. Table or desk shelves. 35. Taboret. 36. Stool.

GROUP VIII.

37. Cross-lap joint. 38. Book trough. 39. Electric cluster. 40. Electric table or desk light. 41. Calendar mount or memo board. 42. Hall rack or mirror frame. 43. Picture-frame. 44. Taboret. 45. China wall rack. 46. Pedestal.

SUPPLEMENTARY.

47. Suggestive treatments for stool. 48. Suggestive treatments for necktie rack. 49. Suggestive treatments for book-rack. 50. Introductory sheet, Drawing. 51. Geometric sheet, Drawing.

CUTTING BOARD

COUNTING BOARD

THRU BORE ³⁄₈″ HOLES AT +

FROM ³⁄₈″ DOWEL STOCK SAW 3 PIECES EACH 1¹⁄₄″ LONG

POINT THE ENDS ¹⁄₁₆″ EACH

COAT AND HAT RACK

³⁄₁₆″ HOLES FOR SCREWS AT ×

2¹⁄₂″ WIRE COAT HOOKS AT +

KEY RACK

³⁄₁₆″ HOLES FOR SCREWS AT ×

³⁄₄″ BRASS CUP HOOKS AT +

RING TOSS

GAME BOARD

FROM ³⁄₈″ DOWEL STOCK MAKE 32 PEGS

POINT ENDS ¹⁄₁₆″ EACH

SOLITAIRE--PLACE ALL PEGS IN THE BOARD--JUMP PEGS ONE OVER ANOTHER ALONG STRAIGHT LINES, HORIZONTALLY, VERTICALLY OR DIAGONALLY--PLAN THE PLAYS SO THAT THE FINAL PEG TO BE REMOVED WILL LAND JUMPER IN CENTRAL HOLE.

SPOOL HOLDER

POINT TOP OF EACH DOWEL ¹⁄₁₆

LAUNDRY REGISTER

AT EACH + BORE A ³⁄₁₆″ HOLE ¹⁄₆″ DEEP

FROM ³⁄₁₆″ DOWEL STOCK SAW 10 PEGS 1″ LONG POINT THE ENDS ¹⁄₁₆″

SHIRTS COLLARS CUFFS U-SHIRTS DRAWERS HANDK’FS SOCKS UNION-S’T PAJAMAS EXTRAE166

SLEEVE BOARD

SECTION AT A-B

BREAD BOARD

SECTION AT A-B

CAKE BOARD OR CROCK COVER

SECTION AT A-B

SCOURING BOARD

CROSS SECTION AT C-D

TO LOCATE F¹ AND F² 1. LOCATE POINT “D”. 2. TAKE “R” = “O-B” AND DRAW. F¹E + EF² = AB

COAT HANGER

SECTION AT A-B

SWEEP ARCS = 16⁷⁄₈″ AND 27¹⁄₈″

NAIL BOX

KNIFE POLISHING BOX

KNIFE AND FORK BOX

BIRD HOUSE

BROOM HOLDER

BENCH HOOK

RIGHT AND LEFT HAND

TEAPOT BLOCKS (BLANK MODEL--TO BE MODIFIED)

SUGGESTIONS

STOCK-³⁄₄″ THICK

THERMOMETER BACK (BLANK MODEL--TO BE MODIFIED)

CALENDAR MOUNT (BLANK MODEL--TO BE MODIFIED)

DESIGNED BY GORDON KELLAR

CARD HOLDER (BLANK MODEL--TO BE MODIFIED)

SUGGESTIONS

BILL FILE (BLANK MODEL--TO BE MODIFIED)

30^d WIRE BOX NAIL

GLUE

HANDKERCHIEF BOX (BLANK MODEL--TO BE MODIFIED)

MODIFIED EDGES

TOP-BOTTOM TOP-BOTTOM TOP

GLOVE BOX (BLANK MODEL--TO BE MODIFIED)

MODIFIED EDGES

TOP-BOTTOM

TOP-BOTTOM

TOP

TOP-BOTTOM

GROOVE JOINT (PREPARATORY TO GROUP VII)

GAGE SETTING

GAGE SETTING

SAW HERE

DADO JOINT

GAGE SETTING

BOOK RACK

ENDS HOUSED INTO BASE ¹⁄₄″

TO SCREW

NECKTIE RACK

MAGAZINE RACK

ENDS HOUSED IN BASE

FOOT STOOL

PAPER OR MAGAZINE WALL RACK

DETAIL OF SHELF

WALL SHELF

TABLE OR DESK SHELVES

TABORET

STOOL

CROSS-LAP JOINT (PREPARATORY TO GROUP VIII)

GAGE SETTING

SAW KERF

GAGE SETTING

BOOK TROUGH

WOODWORK FOR ELECTRIC CLUSTER

CEILING BLOCK

ELECTRIC TABLE OR DESK LIGHT

CALENDAR MOUNT OR MEMO BOARD

HALL RACK OR MIRROR FRAME

10 × 18 MIRROR OR POSTER PICTURE

¹⁄₄ STOCK FOR BACKING

HOOKS AT × FOR HALL RACK

PICTURE FRAME

PERRY PICTURES # 756 AND 757 SUGGESTED

TABORET

CHINA WALL RACK

PEDESTAL

SUGGESTIVE TREATMENTS FOR STOOL

SUGGESTIVE TREATMENTS FOR NECKTIE RACK

HOUSED JOINT

DADO JOINT

SUGGESTIVE TREATMENTS FOR BOOK RACK

HOUSED JOINT

DESIGN BY CLEVELAND ELEMENTARY IND. SCHOOL.

DADO

DADO

ABCDEFGHIJKLMN

OPQRSTUVWXYZ

123456789

90° 30° 60° 45°

ABC

0123

ABC

0123

HEXAGON

SIX-POINT STAR

OCTAGON

ELLIPSE

ADVANCED PROJECTS IN WOODWORK.

LIST OF PLATES.

GROUP IX.

1. Exercises--Keyed tenon; Blind Mortise-and-tenon. 2. Exercises--Miter joint; Glue joint. 3. Exercises--Modeling, Hammer handles. 4. Necktie Rack. 5. Foot Stool. 6. Book Rack. 7. Upholstered Stool. 8. Leg Rest. 9. Cricket. 10. Wall Shelves. 11. Stool (square). 12. Taboret (octagonal top) 13. Taboret (round top). 14. Small Table. 15. Taboret (oblong top). 16. Piano Bench. 17. Piano Bench. 18. Book Stand. 19. Umbrella Stand. 20. Umbrella Stand. 21. Jardiniere Stand. 22. Magazine Stand. 23. Roman Seat. 24. Light Stand. 25. Stool (square). 26. Book Trough. 27. Screen. 28. Tea Table. 29. Hall Rack. 30. Wall China Rack. 31. Side Chair. 32. Arm Chair. 33. Morris Chair. 34. Electric Reading Lamp. 35. Pedestal. 36. Occasional Rocker. 37. Mission Chair. 38. Drop Leaf Table.

GROUP X.

39. Exercises--Mortise-and-tenon; Rabbeted, Grooved. 40. Exercises--Thru Multiple Dovetail; Half blind Dovetail. 41. Waste Paper Box. 42. Wall Cabinet. 43. Telephone Table. 44. Sewing Cabinet. 45. Writing Table. 46. Chafing Dish Stand. 47. Cabinet. 48. Library Table. 49. Writing Desk. 50. Dressing Table. 51. Linen Chest.

_EXERCISE (PREPARATORY TO GROUP IX)_

_KEYED TENON_

_BLIND MORTISE AND TENON_

_EXERCISE (PREPARATORY TO GROUP IX)_

_GLUE JOINT-DOWELING_

_MITER JOINT_

_EXERCISE PREPARATORY TO GROUP IX (CHOOSE ONE)_

_HANDLE FOR BALL PEEN HAMMER_

_HANDLE FOR CLAW HAMMER_

_NECKTIE RACK_

_FOOT STOOL_

_BOOK RACK_

_UPHOLSTERED STOOL_

_LEG REST_

_CRICKET_

_WALL SHELVES_

_STOOL_

_TABORET_

_TABORET_

_SMALL TABLE_

_TABORET_

_PIANO BENCH_

_PIANO BENCH_

_DETAIL OF JOINT AT A-B ENLARGED_

_BOOK STAND_

_END OF LOWER SHELF_

_END OF MIDDLE SHELVES_

_DETAIL OF JOINT AT A-B_

_UMBRELLA STAND_

_UMBRELLA STAND_

_COPPER DRIP PAN_

_JARDINIERE STAND_

_MAGAZINE STAND_

_ROMAN SEAT_

_LIGHT STAND_

_STOOL_

_DETAIL OF CORNER_

_BOOK TROUGH_

_DETAIL OF TROUGH BACK_

_SCREEN_

_MIRROR_

_TEA TABLE_

_HALL RACK_

_WALL CHINA RACK_

_DETAIL OF A-B_

_SIDE CHAIR_

_ARM CHAIR_

_MORRIS CHAIR_

_ELECTRIC READING LAMP_

_SECTION AT A-B_

_PEDESTAL_

_EGG AND DART_

_SECTION AT A-B_

_OCCASIONAL ROCKER_

_MISSION CHAIR_

_DROP LEAF TABLE_

_DETAIL OF JOINT AT A-B_

_EXERCISE--PREPARATORY TO GROUP X_

_MORTISE and TENON-RABBETED_

_HAUNCHED MORTISE AND TENON-GROOVED_

_SAW KERF_

_SAW KERF_

_EXERCISE--PREPARATORY TO GROUP X_

_THRU MULTIPLE DOVETAIL_

_HALF-BLIND DOVETAIL_

_WASTE PAPER BOX_

_WALL CABINET_

_DETAIL OF SHELF AT A-B_

_TELEPHONE TABLE_

_SEWING CABINET_

_WRITING TABLE_

_CHAFING DISH STAND_

_CABINET_

_LIBRARY TABLE_

_WRITING DESK_

_COMMERCIAL DESIGN_

_DRESSING TABLE_

_LINEN CHEST_

_SECTION AT A-B_

Transcriber’s Notes

Depending on the hard- and software used and their settings, not all elements may display as intended. Some forms, tables and illustrations may not display properly in a narrow window or on a narrow screen.

Except as mentioned under Changes made below, the language used in the source document has been retained, including unusual, archaic and inconsistent spelling, hyphenation, capitalisation, etc. Errors, discrepancies and ambiguities in (cost) calculations have not been corrected unless mentioned below.

Page 78-79, price calculations: The source document gives .00 for the price of the chisel-board.

Page 110, (Mechanical Drawing 12 weeks ...: there is no closing bracket in the source document.

Page 211, Plate 24: the Group number is not included in the caption.

Changes made:

Illustrations, forms, tables etc. have been moved out of text paragraphs.

Some obvious minor punctuation and typographical errors have been corrected silently. × and x in multiplications and dimensions have been standardised to ×. In several forms and tables some of the ditto marks (“) have been replaced with the dittoed text. Some wide forms and tables have been split.