Public Domain

Carpentry For Boys In A Simple Language Including Chapters On D

KNOWLEDGE OF TOOLS.--A knowledge of tools and their uses is the first and most important requirement. The saw, the plane, the hatchet and the hammer are well known to all boys; but how to use them, and where to use the different varieties of each kind of tool, must be learned,...

Chapters

1. Chapter 1

KNOWLEDGE OF TOOLS.--A knowledge of tools and their uses is the first and most important requirement. The saw, the plane, the hatchet and the hammer are well known to all boys;...

2. Chapter 2

CARE OF TOOLS.--Dull tools indicate the character of the workman. In an experience of over forty years, I have never known a good workman to keep poorly sharpened tools. While i...

3. Chapter 3

Observation may form part of each boy's lesson, but when it comes to the handling of tools, practice becomes the only available means of making a workman. Fifty years of observa...

4. Chapter 4

FUNDAMENTALS OF DESIGNING.--A great deal of the pleasure in making articles consists in creative work. This means, not that you shall design some entirely new article, but that...

5. Chapter 5

CONCRETE EXAMPLES OF WORK.--A concrete example of doing any work is more valuable than an abstract statement. For this purpose I shall direct the building of a common table with...

6. Chapter 6

THE SQUARE.--The square is, probably, the oldest of all tools, and that, together with the compass, or dividers, with which the square is always associated, has constituted the...

7. Chapter 7

THE RIGHT NAME FOR EVERYTHING.--Always make it a point to apply the right term to each article or portion of a structure. Your explanation, to those who do know the proper techn...

8. Chapter 8

A knowledge of drawing, at least so far as the fundamentals are concerned, is of great service to the beginner. All work, after being conceived in the brain, should be transferr...

9. Chapter 9

MOLDINGS.--The use of moldings was early resorted to by the nations of antiquity, and we marvel to-day at many of the beautiful designs which the Ph[oe]necians, the Greeks and t...

10. Chapter 10

In the chapter on How Work is Laid Out, an example was given of the particular manner pursued in laying out mortises and tenons, and also dovetailed work. I deem it advisable to...

11. Chapter 11

House building is the carpenter's craft; cabinet-making the joiner's trade, yet both are so intimately associated, that it is difficult to draw a line. The same tools, the same...

12. Chapter 12

BRIDGES.--Bridge building is not, strictly, a part of the carpenter's education at the present day, because most structures of this kind are now built of steel; but there are ce...

13. Chapter 13

In this place consideration will be given to some of the features relating to the materials to be employed, particularly with reference to the manner in which they can be worked...

14. Chapter 14

ADVANTAGES OF WOOD TURNING.--This is not, strictly, in the carpenter's domain; but a knowledge of its use will be of great service in the trade, and particularly in cabinet maki...

15. Chapter 15

As this subject properly belongs to the painter and decorator, it is not necessary to go into details concerning the methods used to finish off your work. As you may not be able...

16. Chapter 16

A carpenter has a trade; the architect a profession. It is not to be assumed that one vocation is more honorable than the other. A _profession_ is defined as a calling, or occup...

17. Chapter 17

As stated in the Introductory, the purpose of this book is to show _how to do the things_, and not to draw a picture in order to write a description of it. Merely in the line of...

18. Chapter 18

In the foregoing chapters we have referred the reader to the simple tools, but it is thought desirable to add to the information thus given, an outline of numerous special tools...

19. Chapter 19

The chapter on Bridge Building gives some suggestions as to form of trusses, the particular types there shown being principally for wide spans. Such trusses were made for one pu...

20. Chapter 20

In uniting two or more elements, some particular type of joint is necessary. In framing timbers, in making braces, in roof construction and supports, in floor beams, and in nume...

21. Chapter 21

In the mechanical arts, workers are as likely to learn from the mistakes committed as through correct information imparted. Advice, therefore, might be considered superfluous. B...